 | Gussets
Die-cast aluminum gussets are available for connection a wide range of profile sizes and applications, from 20x20 to 100x100. Elongated holes allow gussets to be adjusted for position , while guide tabs assure proper alignment in the profiles T-slot. Tabs can be easily removed with a flat-tip screwdriver for cross-connection of profiles. |
|
 | Die-Cast Foundation Brackets
These aluminum foundation brackets have a similar die-cast construction as the gussets. Easy to remove alignment tabs help to center the bracket in the T-slot properly. Remove the bottom tabs to use as a foundation bracket, or leave them on to use as a shelf bracket. |
|
 | Inside-Outside, Inside-Inside Gussets
These gussets are used when you want the convenience of a gusset but need to have an open T-slot |
|
 | Corner Connectotors
For attaching 2 to 3 profiles at 90 degree angles. Avaiable for profile sizes 20mm, 30mm, 40mm, 45mm, and 50mm. |
|
 | Connection Screws
Connection screws provide a strong, right angle connection between two profiles while leaving the T-slots open for panels. Machining of an access hole is required for all connection screws and tapping is required for non self-tapping screws |
|
 | Bolt Connectors
Bolt connectors provide the strongest right-angle connection with minimal machining. One through hole is required in one of the two connecting profiles. Through hole sizes are provided in charts for each bolt connector type. |
|
 | Quick Connectors
Quick connectors allow for fast assembly and dissambly of structures for reconfiguration or mobility. Connectors are available in a rigid version for 90 degree connections, end-to-end variable angle connections, and end-to-side variable angle connections. |
|
 | Other Right-Angle Connectors
These 90° connectors are more specialized for specific tasks such as: mitred corner connections, multiple profile junctions, and T-connections. |
|
 | End-to-End Connectors
These connectors are used to connect two profiles end-to-end. Several different varieties are provided to fit any specific application |
|
 | Angle Connectors
The following connectors are used to connect profiles at an angle. Fixed connectors set the angle at 45° while adjustable connectors allow almost any angle. |
|
 | Joining Plates
Joining plates fasten to the outside of profiles to reinforce joints. Four different styles are available: corner joints, T joints, cross joints and straight joints. |
|
